Brand Listings


Radiolink AT10II AT10 II 2.4G 10CH Transmitter With R10DS Receiver Orange  Thumbnail

Radiolink AT10II AT10 II 2.4G 10CH Transmitter With R10DS Receiver Orange

Product Description - Radiolink AT10II 2.4G 10CH Transmitter With R10DS Receiver Orange Description: Brand Name: RadioLink Color: Orange Item Name: AT10II Transmitter with Receiver Specification Of the AT10II Transmitter: Frequency 2.4GHz ISM band(2400MHz to 2485MHz) Modulation Mode QPSK Channel Bandwidth 5.0MHz Spread Spectrum DSSS,FHSS Adjacent Channel Rejection >38dBM Transmitter Power <100mW(PCB testing),<20dBm(3 meter air testing) Operating Current <95mA Operating Voltage 8.6~15V Control Distance 800 meters ground Channel 10 Channel Simulator Mode Under the simulator model the transmitter action turn off, change to power saving model Screen 16 colorful screen Size 78 x 52mm 320*480 pixel Compatible Model Include all 120 degree and 90 degree swashplate helicopter,all fix wing and glider, five flying model. Size 18 x 9.5 x 22cm Weight 0.95kg Specification Of R10DS Receiver: Frequency 2.4GHz Channel 10CH,support SBUS and PWM signal output Working Voltage 4.8-10V Working Current 38-45mA Dimension 50x31.5x14.5mm Weight 14g Two signal working mode of R10DS: Red LED always, SBUS and PWM signal working at the same time, 10 channels totally. (1) PWM signal output: PWM signal output from row 1 to row 10(CH1 to CH10). (2) SBUS signal output : row eleven support SBUS signal output. How to match code with transmitter: 1. Place the transmitter and the receiver close to each other within 1 meters. 2. Turn on the transmitter, then power on the R10DS. 3. Connect CH3 of R10DS to ESC. 4. There is a black button on the R10DS, use a thin stick press the button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on. Features: Upgraded version of Radiolink AT10,with DSSS and FHSS dual signal Higher accuracy of anti-interference and transmitter control bars than AT10. Support English & Chinese Menu Multiple function remote control system Including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model,you can fly any model by this radio. 3.5 inch colorful screen 320480 resolution,clear display menu and graphs. Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it. High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil. Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology. Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when work with flight controller APM or PIX. Note: The AT10II transmitter is NOT compatible with R10D receiver. English Manual,Click Here Package included: 1 x Radiolink AT10II 10 Channel transmitter 1 x Receiver 1 x PRM-01 module {more}

Brand - Radiolink
Model - 915395

Product Price - 129.99 $

Order Radiolink AT10II AT10 II 2.4G 10CH Transmitter With R10DS Receiver Orange

Radiolink AT10II AT10 II 2.4G 12CH Transmitter With R12DS Receiver Orange Thumbnail

Radiolink AT10II AT10 II 2.4G 12CH Transmitter With R12DS Receiver Orange

Product Description - Radiolink AT10II 2.4G 10CH Transmitter With R12DS Receiver Orange Description: Brand Name: RadioLink Color: Orange Item Name: AT10II Transmitter with Receiver Specification Of the AT10II Transmitter: Frequency 2.4GHz ISM band(2400MHz to 2485MHz) Modulation Mode QPSK Channel Bandwidth 5.0MHz Spread Spectrum DSSS,FHSS Adjacent Channel Rejection >38dBM Transmitter Power <100mW(PCB testing),<20dBm(3 meter air testing) Operating Current <95mA Operating Voltage 8.6~15V Control Distance 800 meters ground Channel 10 Channel Simulator Mode Under the simulator model the transmitter action turn off, change to power saving model Screen 16 colorful screen Size 78 x 52mm 320*480 pixel Compatible Model Include all 120 degree and 90 degree swashplate helicopter,all fix wing and glider, five flying model. Size 18 x 9.5 x 22cm Weight 0.95kg Specification Of R12DS Receiver: Frequency 2.4GHz Channel 12CH,support SBUS and PWM signal output Working Voltage 4.8-10V Working Current 38-45mA(input voltage: 5V) Dimension 50x31.5x14.5mm Weight 14g Control Range About 4KM air (Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations). Two signal working mode of R12DS: (1)PWM signal output working mode: red LED indicates PWM signal output, 11 channels Totally. (2) S-BUS signal output working mode: blue/purple LED indicates S-BUS signal output, 12 channels totally. S-BUS and PWM signal working at the same time. S-BUS signal channel(3 pin of row 11) output 12 channels S-BUS signal, PWM signal channels(3 pin of row 1 to row 10) output CH3 to CH12 PWM signals, but 12 channel in total. How many PWM signal channels you can use depends on how many S-BUS signal channels you have used(e.g: you have use 4 S-BUS signal channels, then you have 8 PWM signal channels to use). How to match code with transmitter: 1. Put the transmitter and the receiver close to each other within 1 meters. 2. Turn on the transmitter, then power on the R12DS. 3. Connect CH3 of R12DS to ESC. 4. There is a black button on the R12DS, use a thin stick press the button twice in two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal LED always on. Features: Upgraded version of Radiolink AT10,with DSSS and FHSS dual signal Higher accuracy of anti-interference and transmitter control bars than AT10. Support English & Chinese Menu Multiple function remote control system Including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model,you can fly any model by this radio. 3.5 inch colorful screen 320480 resolution,clear display menu and graphs. Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it. High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil. Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology. Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when work with flight controller APM or PIX. Note: The AT10II transmitter is NOT compatible with R10D receiver. English Manual,Click Here Package included: 1 x Radiolink AT10II 10 Channel transmitter 1 x Receiver 1 x PRM-01 module {more}

Brand - Radiolink
Model - 1115434

Product Price - 129.99 $

Order Radiolink AT10II AT10 II 2.4G 12CH Transmitter With R12DS Receiver Orange

RadioLink AT9S 2.4GHz 10CH Upgrade Transmitter with R9DS DSSS and FHSS Receiver  Thumbnail

RadioLink AT9S 2.4GHz 10CH Upgrade Transmitter with R9DS DSSS and FHSS Receiver

Product Description - Feature 1.Fast response, 3ms only, which is much less than the average 20ms even 9 channels act synchronously. 2.English,Chinese ,EsPanol,Deutsch,French,Italiano,Turkish,Russian&Korean menu can be switched, full types specialize helicopter 8 swash plate modes, fixed wing 2 airfoils 3 rears, gliders 4 airfoils and 2 rears, multi-copter menu. 3.DSSS and FHSS spread-spectrum technology working synchronously, QPSK modulation support excellent anti-interference performance. 4.Programmable mix control. Basic menu, advanced menu, graphic view for verities of throttle and servo curve. 5.Support S-BUS, PPM and PWM signal. 6.Unique telemetry Receiver integrates signal strength and voltage telemetry sensor. Both R10DS and R9DS support extended engine voltage telemetry module PRM-01 and OSD info telemetry module PRM-02. PRM-02 can feedback GPS, SPEED, voltage etc. on AT9S/AT10 display when work with flight controller APM or PIX. 7.4096 section precision, 0.25us per section, servo anti-shake rudder. 8.Vibration alarm. 9.Support USB online upgrade, the upgrade firmware V1.3.2 add CAR and BOAT model type. 10.Four VR switches, three three-gear switches, four two-gear switches, a reset trainer switch. Support multiple aerial control mode and PTZ control. Specification 1.Size: AT9S- 183*100*193mm, R9DS- 41*23*14mm 2.Weight: 0.88kg 3.Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz) 4.Modulation mode: QPSK 5.Channel bandwidth: 5.0 MHz 6.Spread spectrum: DSSS&FHSS 7.Adjacent channel rejection: >38dbm 8.Transmitter power: <100mW (20dbm ) 9.Operating current: <90mA 10.Operating voltage: 7.4~18.0V 11.Control distance: more than 900 meters ground, 1500 meters air, the actual control distance depends on the flying environment 12.Channel: 9 channels 13.Compatible model: include all 120 degree and 90 degree swash-plate helicopter, all fix wings, glider and multi-rotor 14.Simulator model: under the simulator model the transmitter action turn off, change to power saving model 15.Screen: 2.8 inches 16 colorful screen, 240*320 pixels 16.Support receivers: R9DS(S-BUS&PWM) R10DS and R6DS Note If you do not receive CD, click here. Package 1x RadioLink AT9S Upgrade Transmitter 1x Mini R9DS 1x CD {more}

Brand - Radiolink
Model - 1062334

Product Price - 126.99 $

Order RadioLink AT9S 2.4GHz 10CH Upgrade Transmitter with R9DS DSSS and FHSS Receiver

RadioLink CB86 Plus 6A 210W Lipo Balance Charger Discharger Thumbnail

RadioLink CB86 Plus 6A 210W Lipo Balance Charger Discharger

Product Description - RadioLink CB86 Plus 6A 210W Lipo Balance Charger Discharger Description: Brand Name:RadioLink Item Name:CB86-plus Balance Charger DC Input: 11-15V Max Output: 216W Charge current range: 0.1-6A Discharge current range: 1.0A Balance Current: 6A Compatible Battery Type: 1S-6S eight Batterise Working Mode: cycle/parallel/discharge model Weight: 800g Dimension: 188*104*57mm Display: 2.8 iches TFT full-color display Voice: Programmable start and off buzzer voice Features: It's 1mV Precision, more accurately. Powerful charger, capatible with 1S-6S 8 bettary sets charging at one time. With Secure Protection, no need to worry about the security problems. High efficiency and low consumption for save the electricity. The screen display the situation of the batteris, a doctor of battery. And it's a real time display. With U-Disk upgrate model. Package Includes: 1 x CB86 Plus Balance Charger 1 x Instruction manual {more}

Brand - Radiolink
Model - 972541

Product Price - 99.39 $

Order RadioLink CB86 Plus 6A 210W Lipo Balance Charger Discharger

RadioLink AT9 2.4G 9CH Transmitter With R6DS PPM PWM SBUS Output Receiver Mode 2 Thumbnail

RadioLink AT9 2.4G 9CH Transmitter With R6DS PPM PWM SBUS Output Receiver Mode 2

Product Description - RadioLink AT9 2.4GHz 9CH Transmitter With R6DS 6CH PPM PWM SBUS Output Receiver Mode 2 Description: Brand Name:RadioLink AT9 TransmitterSpecification: Weight: 880g Size: 183*193*100mm Modulation mode: QPSK Spread spectrum: DSSS Operating Voltage: 8.6~15V Channel bandwidth: 5.0MHz Operating Current: <105mA Adjacent channel rejection: >38dbm Control distance: more than 600 meters ground Channel: 9 Channel, 8~9 channel are customize Screen: 2.8 inch 16 colorful screen 240*320 pixel3 Frequency: 2.4GHz ISM band (2400MHz to 2485MHz) Transmitter power: <100mW(PCB testing) <20dbm(3 meter air testing) Simulator model: under the simulator model the transmitter action turn off, change to power saving model Compatible model: Include all 120 degree and 90 degree swash plate helicopter, all fix wing and glider, five flying model R6DS Receiver Specification: Brand Name: Radiolink Item Name: R6DS Band: 2.4G Channel: 6 (Red LED indicator is for PWM mode. Blue LED for PPM, can be extended to 10channels) Receiver Operation: SBUS/PPM and PWM signal change(Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS/PPM.red LED indicates the normal PWM and blue/purple indicates SBUS/PPM.) Power Input: MAX 6V Control Distance: 600m in air Current Consumption: 38-45mA (Input voltage:5V) Dimension: 251611mm Weight: 3.9g Precision: 4096 AT9 Transmitter Feature: -Adopt two-transmission technology of RadioLink AT10 10CH Radio Control, support signal strength, receiver voltage monitored, and extending battery voltage, temperature, motor RPM, GPS etc. -Support English & Chinese Menu. Including helicopter 8 swash plate models, fixed wing 2 airfoils 3 rears, gliders 4 airfoils and rears. Freely operating any styled aircraft -Four VR switches, three three-way switches, four two-way switches, a reset trainer switch. Support multiple aerial control mode and PTZ control. -Programmable mix control. Basic menu, Advanced menu,Graph view for varieties of throttle and servo curve. -Fast response, 3ms only, which is much less than the average 20ms even 9 channels it acts synchronously. -DSSS spread spectrum mode supplies better performance in anti-interference -2.8 inch 16 colors LCD resolution 240320 distinct and magnificent -4096 section precision, 0.25us per section, servo anti-shake rudder -Actual measurement: ground 600 meters, air 1000 meters -Support USB online upgrade -Vibration alarm R6DS Receiver Features: -DSSS&FHSS act perfect on anti interference, especially on 433 and graph transmission. -Output SBUS, PPM and PWM signals simultaneously. -Top speed response, 3ms for all channels parallel. -Top precision 4096, 0.25us every bit insure every servo stable. -Sub miniature size, totally weights 3.4 grams, never burden to your drones, best choice for light drones. -All channels response parallel, totally 3ms. -Specially used for light drones, compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D -One single cable connect with the flight controller, easy setting -PWM output: 6 channels totally. -S.BUS output -PPM output: CH1 outputs PPM signal for 10 channels, and channel 2 to channel 6 output independent PWM signal simultaneously. All channels have a response time of 3 ms. Specially designed for light drones, and compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D etc. All it takes is one single cable connected to your flight controller and you're good to go. And with its miniature size and a total weight of 3.9 grams, the R9D will never be cumbersome on your drones. Package included: 1 x AT9 2.4G 9CH Transmitter 1 x R6DS 6CH PPM PWM SBUS Output Receiver {more}

Brand - Radiolink
Model - 1100776

Product Price - 92.99 $

Order RadioLink AT9 2.4G 9CH Transmitter With R6DS PPM PWM SBUS Output Receiver Mode 2

1000W 24V 42A High-power Power Supply for Radiolink CP620 PL8 PL6 Charger Thumbnail

1000W 24V 42A High-power Power Supply for Radiolink CP620 PL8 PL6 Charger

Product Description - 1000W 24V 42A High-power Power Supply for Radiolink CP620 PL8 PL6 Charger Description: Features: High efficiency, 100% full load aging Cooling: natural cooling Operating frequency: 37KHz DC output voltage: 24V Output voltage tolerance: 1% Rated output current: 40A Output current range: 1-40A Output power: 1000W Ripple and noise: 75mVp-p DC voltage adjustable range: 10% Start, rise, hold time: 200ms, 100ms, 30ms full load Input voltage range: 110-220V AC 47-63HZ AC input current: 0.5A / 115V, 0.25A / 230V Efficiency: 85% Inrush current: cold start current 28A / 220V AC Leakage current: <0.5mA / 240V AC Overload protection: 110% -160% cut off the output, reentrant recovery Weight: 1450g Size: 241 * 125 * 65mm (L * W * H) Package Included: 1 x 1000V 24V 42A High-power Power Supply {more}

Brand - Radiolink
Model - 1101478

Product Price - 79.99 $

Order 1000W 24V 42A High-power Power Supply for Radiolink CP620 PL8 PL6 Charger

RadioLink RC3S Transmitter with R4EH-H Receiver For RC Car Boat Thumbnail

RadioLink RC3S Transmitter with R4EH-H Receiver For RC Car Boat

Product Description - RadioLink RC3S Transmitter with R4EH-H Receiver For RC Car Boat Description: Receiver: Size:51.5*24*15mm Channel number:4 channels Power standard:4.6V-10V Frequency:2.4GHz Weight:5g Transmitter: Size : 213*117*115.5mm Weight : 420g Channel number:4 channels Power standard : 6DVC(1.5AA*4) RF power:less than 10dbm Power extending:JST port 2S~3S LiPo/LiFePo battery suitable lipo battery size:less than 90 x 60mm Modulation:FHSS Low voltage alert:Yes(lower than 4.6V) Data resolution:2048 RF range:300meters on ground Frequency:2.4GHz LCD:128*64 lattice(with backlight) Failsafe:in 1 second receiver fail getting signal from TX,the throttle will be 0,servos keep the last status. Package Included: 1x RadioLink RC3S Transmitter 1x RadioLink RC3S Receiver 1 x Manual {more}

Brand - Radiolink
Model - 928461

Product Price - 49.99 $

Order RadioLink RC3S Transmitter with R4EH-H Receiver For RC Car Boat

Radiolink R12DS 2.4G 12CH FHSS DSSS Spread Spectrum Dual Antenna Receiver Thumbnail

Radiolink R12DS 2.4G 12CH FHSS DSSS Spread Spectrum Dual Antenna Receiver

Product Description - Working Mode: 1.PWM signal output working mode:red LED indicates PWM signal output, 11 channels Totally. 2.S-BUS signal output working mode: blue/purple LED indicates S-BUS signal output, 12 channels totally. S-BUS and PWM signal working at the same time. S-BUS signal channel(3 pin of row 11) output 12 channels S-BUS signal, PWM signal channels(3 pin of row 1 to row 10) output CH3 to CH12 PWM signals, but 12 channel in total. How many PWM signal channels you can use depends on how many S-BUS signal channels you have used(e.g: you have use 4 S-BUS signal channels, then you have 8 PWM signal channels to use). PWM signal working mode: S-BUS signal working mode: Description: Brand Name: Radiolink Item Name: R12DS 2.4G 12CH Dual Antenna Receiver Channels: 12 channels,output 12 channels signal, support S-BUS and PWM signal output synchronously. Working voltage: 4.8-10V Working current: 38-45mA(input voltage: 5V) Size: 50*31.5*14.5 MM Weight: 14g Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX. Resolution: 4096 section precision, 0.25us per section, servo anti-shake rudder. Control distance: about 4 kilometers air(Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations). Note: 1.Put the transmitter and the receiver close to each other within 1 meters. 2.Turn on the transmitter, then power on the R12DS. 3.Connect CH3 of R12DS to ESC. 4.There is a black button on the R12DS, use a thin stick press the button twice in two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal LED always on. Instroduction:check here Package Included: 1X Radiolink R12DS 2.4G 12CH Dual Antenna Receiver {more}

Brand - Radiolink
Model - 1117703

Product Price - 19.99 $

Order Radiolink R12DS 2.4G 12CH FHSS DSSS Spread Spectrum Dual Antenna Receiver

Radiolink 2.4G 4CH HV R4EH-H Receiver Thumbnail

Radiolink 2.4G 4CH HV R4EH-H Receiver

Product Description - Radiolink 2.4G 4CH HV R4EH-H Receiver Description: It's radiolink 2.4G 4CH high voltage R4EH-H receiver suitable for radiolink RC3S transmitter. Size:51.5*24*15mm Channel number:4 channels Power standard:4.6V-10V Frequency:2.4GHz Weight:5g Package Included: 1 x R4EH-H HV receiver {more}

Brand - Radiolink
Model - 935345

Product Price - 13.99 $

Order Radiolink 2.4G 4CH HV R4EH-H Receiver

Radiolink R8FM 2.4G 8CH FHSS Receiver With S-BUS PPM Output For T8FB Thumbnail

Radiolink R8FM 2.4G 8CH FHSS Receiver With S-BUS PPM Output For T8FB

Product Description - Radiolink R8FM 2.4G 8CH FHSS Receiver With S-BUS PPM Output For T8FB Radiolink R8FM, 2.4G 8 channels receiver, 2.5 gram weight, S-BUS and PPM signal support, use for Radiolink transmitter T8FB, is the best choice for racing drone. Description: Brand: Radiolink Item number: R8FM Channels: 8 channels Working voltage: 4.8-6V Working current: 30mA (input voltage: 5V) Size: 16.0*21.5*1.0MM Weight: 2.5g 2048 section precision, 0.5us per section, servo anti-shake rudder. Control distance: about 300m ground and 600m air, actually control distance depends on the environment. Two signal working mode: Blue/purple LED, S-BUS signal 8 channels totally. Red LED always, PPM signal, 8 channels totally. S-BUS and PPM signal change: Quick press the ID SET switch two times within 1 second, the signal is changed from S-BUS to PPM. The red LED indicates the PPM and blue/purple indicates S-BUS. How to match code with transmitter: 1. Put the transmitter and the receiver close to each other within 1 meters. 2. Turn on the transmitter, then power on the R8FM. 3. Connect CH3 of R8FM to ESC. 4.There is a black button on the R8FM, press the binding button twice in two seconds and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on. Installment of receiver antenna: 1. The antenna must be kept as straight as possible. Otherwise it will reduce the effective range. 2. Large model aircraft may of some metal part interfering signal; in this case the antennas should be placedat both sides of the model. Then the best RF signal condition is obtained at any flying attitude. 3. The antennas must be kept away from conductive materials, such as metal and carbon by at leasta halfinch.The coaxialpartofthe antennas doesnotneedtofollowtheseguidelines,butdo not bend it in a small radius. 4. Keep the antennas away from the motor, ESC, and other noise sources as much as possible. 5. Press and hold the Easy Link (ID SET) one second, now the receiver starts work. 6. After all of the above steps finished, the LED indicator will turn and keep in red. 7. The receiver can be packed by sponge or foam for shocking proof when it is installed to the model. Package Included: 1X Radiolink R8FM 2.4G 8CH FHSS Receiver {more}

Brand - Radiolink
Model - 1120435

Product Price - 11.99 $

Order Radiolink R8FM 2.4G 8CH FHSS Receiver With S-BUS PPM Output For T8FB

Radiolink R6DSM 2.4G 10CH DSSS FHSS Receiver for AT9 AT9S AT10 AT10 PPM SBUS Output Thumbnail

Radiolink R6DSM 2.4G 10CH DSSS FHSS Receiver for AT9 AT9S AT10 AT10 PPM SBUS Output

Product Description - Radiolink R6DSM 2.4G 10CH DSSS FHSS Receiver for AT9 AT9S AT10 AT10 PPM SBUS Output Radiolink R6DSM 2.4G 10CH Receiver, DSSS and FHSS spread spectrum working synchronously, 1 gram weight, SUBS signal, use for Radiolink transmitters AT9, AT9S, AT10 and AT10 is the best choice fo racing drone. Description: Brand: Radiolink Item Name: R6DSM 2.4G 10CH Receiver Channels: 10 channels Output signal: PPM/SBUS Working voltage: 4.8-6V Working current: 38-45mA(input voltage:5V) Size: 15*13MM Weight: 1g Detachable antenna 4096 section precision, 0.25us per section, servo anti-shake rudder. Control distance: about 600 meters, actually control distance depends on the environment. Two signal working mode: Blue/purple LED, SBUS signal 10 channels totally. Red LED always, PPM signal, 10 channels totally. Radiolink R6DSM Receiver User Manual, Click Here Package Included: 1X Radiolink R6DSM 2.4G 10CH Receiver {more}

Brand - Radiolink
Model - 1086867

Product Price - 11.99 $

Order Radiolink R6DSM 2.4G 10CH DSSS FHSS Receiver for AT9 AT9S AT10 AT10 PPM SBUS Output

Radiolink R6DS 2.4G 6CH PPM PWM SBUS Output Receiver Compatible AT9 AT10 Transmitter Thumbnail

Radiolink R6DS 2.4G 6CH PPM PWM SBUS Output Receiver Compatible AT9 AT10 Transmitter

Product Description - Radiolink R6DS 2.4G 6CH PPM PWM SBUS Output Receiver Compatible AT9 AT10 Transmitter The R6DS a small 6 channel S.BUS / PPM / PWM ready receiver from Radiolink with three signal output. The R6DS can output both PWM and S.BUS output simultaneously. Two operating modes output: PWM output: 6 channels totally. S.BUS output PPM output: CH1 outputs PPM signal for 10 channels, and channel 2 to channel 6 output independent PWM signal simultaneously. All channels have a response time of 3 ms. Specially designed for light drones, and compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D etc. All it takes is one single cable connected to your flight controller and you're good to go. And with its miniature size and a total weight of 3.9 grams, the R9D will never be cumbersome on your drones. Description: Brand Name: Radiolink Item Name: R6DS Band: 2.4G Channel: 6 (Red LED indicator is for PWM mode. Blue LED for PPM, can be extended to 10channels) Power Input: MAX 6V Control Distance: 600m in air Current Consumption: 38-45mA (Input voltage:5V) Dimension: 251611mm Weight: 3.9g Precision: 4096 Features: DSSS&FHSS act perfect on anti interference, especially on 433 and graph transmission. Output SBUS, PPM and PWM signals simultaneously. Top speed response, 3ms for all channels parallel. Top precision 4096, 0.25us every bit insure every servo stable. Sub miniature size, totally weights 3.4 grams, never burden to your drones, best choice for light drones. All channels response parallel, totally 3ms. Specially used for light drones, compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D One single cable connect with the flight controller, easy setting Receiver Operation: SBUS/PPM and PWM signal change Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS/PPM. The red LED indicates the normal PWM and blue/purple indicates SBUS/PPM. Installment of receiver antenna The antenna must be kept as straight as possible. Otherwise it will reduce the effective range. Large model aircraft may of some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude. The antennas must be kept away from conductive materials, such as metal and carbon by at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius. Keep the antennas away from the motor, ESC, and other noise sources as much as possible. Press and hold the Easy Link (ID SET) one second, now the receiver starts work. After all of the above steps finished, the LED indicator will turn and keep in red. The receiver can be packed by sponge or foam for shocking proof when it is installed to the model. After all of the above steps finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection . English Manual,Click Here Package Included: 1x Radiolink R6DS receiver {more}

Brand - Radiolink
Model - 1077726

Product Price - 10.99 $

Order Radiolink R6DS 2.4G 6CH PPM PWM SBUS Output Receiver Compatible AT9 AT10 Transmitter

RadioLink PRM-02 OSD Telemetry Module For R9D R10D Compatible PIX APM Thumbnail

RadioLink PRM-02 OSD Telemetry Module For R9D R10D Compatible PIX APM

Product Description - RadioLink PRM-02 OSD Telemetry Module For R9D R10D Compatible PIX APM Description: OSD Telemetry module transmits the data from the flight controller and shows the data of SPEED, RISE, THRO, VOLT, LATI, LONG, ALT, GPS, RSSI, MODE, YAW, ROLL, PITC, DIST in the display screen of AT9 or AT10. Specification: Brand Name: RadioLink Item Name: OSD telemetry module Item NO.: PRM-02 Dimension: 33*15mm Weight: 6g Introduction: - Please upgrade your AT9 firmware to V1.2.6(OSD).(1)AT10 firmware to V1.0.6(OSD). - So far, this OSD telemetry module is compatible with PIX and APM flight controller. - OSD telemetry module can work with both R9D and R10D. Connection: Connect one end of the OSD to R9D or R10D, and the other end to PIX or APM. More details click here Note: - No output if USB connect flight-controller and computer. - No VOLT information if use UBEC, have to offer electricity for flight-controller by volt ammeter. - Have to short-circuit the MUX-TXO/OSD of APM when connect PRM-02(OSD) to APM. Package Included: 1x RadioLink PRM-02 OSD Telemetry Module {more}

Brand - Radiolink
Model - 1022198

Product Price - 10.99 $

Order RadioLink PRM-02 OSD Telemetry Module For R9D R10D Compatible PIX APM