Brand Listings


2.4G CC2500 A7105 Flysky Frsky Devo DSM2 Multiprotocol TX Module With Antenna Thumbnail

2.4G CC2500 A7105 Flysky Frsky Devo DSM2 Multiprotocol TX Module With Antenna

Product Description - 2.4G CC2500 A7105 Flysky Frsky Devo DSM2 Multiprotocol TX Module With Antenna Customer Review: Description: The 4 in 1 wireless module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board,with MCU baseplate,can support a variety of remote control protocols by identifying the PPM signal output of the remote control,such as Walkera DEVO,Spektrum DSM2,Flysky,Frsky,WLToys,Hubsan,Hisky,etc. It can control up to several hundreds airplanes (or receivers). This module can recognize the remote control PPM signal, then converted into the corresponding standard wireless remote control format,which means that in theory as long as the remote control is with analog functions, it can work. But this item didn't come with a housing,so you will need to solve the housing problem. This product includes the wireless module and the MCU baseplate. The wireless module is responsible for transmitting and receiving 2.4G wireless signals,the MCU baseplate is responsible for processing data and implementing remote control protocol,they should be used together. Specification: Item Name: 4 in 1 multi-protocol wireless module Weight: About 28g Size: 13*8*1cm Version: Flysky,Frsky,JR (optional) Note: The module version depends on your transmitter brand,if your transmitter brand is JR,then please choose JR version,the Flysky version is specially for Flysky TH9X transmitter,the other brands transmitter can choose Frsky. We will soon begin to purchase the version 2,but we still have the version 1,so during this time,we will delivery the V1 and V1.2 randomly. Pin Function: Number Name Property Description 1 VCC Power 3.3V Power supply 2 GND Power ground 3 PE1 input Amplifier and antenna switching signal. See the truth table 4 PE2 input Amplifier and antenna switching signal. See the truth table 5 CSN1 input A7105 chip select signal 6 CSN2 input CC2500 chip select signal 7 CSN3 input NRF24L01 chip select signal 8 CSN4 input CYRF6936 chip select signal 9 SCK input SPI clock signal 10 MOSI input SPI input for slave device 11 MISO output SPI output for slave device 12 CYRF_RST input CYRF6936 Reset 16 RFO in/out RF signal input/output, connect to antenna others GND Power ground Truth table: status PE1 PE2 A7105 RF signal to antenna 0 0 CC2500 RF signal to antenna 0 1 NRF24L01 RF signal to antenna 1 0 CYRF6936 RF signal to antenna 1 1 For more information about how to update, please visit the RCG forum: http://www.rcgroups.com/forums/showthread.php?t=2165676 If you have any problem,welcome to discuss on this RCG forum: http://www.rcgroups.com/forums/showthread.php?t=2709034 Supported Protocols: - Flysky (Generation I protocol,based on A7105,tested) - Hubsan (Based on A7105,tested) - Frsky (Based on CC2500,tested) - Hisky (Based on24L01,tested) - V2x2 (Based on 24L01) - Dsm2 (Based on CYRF6936,tested) - Devo (Based on CYRF6936,tested) - YD717 (Based on 24L01 ) - KN (V977,Based on 24L01,tested) - SymaX (Based on 24L01) - SLT (Based on 24L01) - CX10 (Based on 24L01) - CG-023 - BAYANG - SIMAX5C Note: The above protocols are transplanted from open source projects based on the remote control Walkera DEVIATION,the the original author have tested almost the protocols,but he is not specially test for this 4 in 1 wireless module,the protocols our supplier tested have been stated above,untested protocols does not rule out is not supported,but there may be a problem of program configuration,so not rule out the subsequent firmware can support. Open source protocol is mostly cracked,protocol version is constantly updated,inevitably there are omissions. Including but not limited to the following issues: - Part program version DSM2 have protocol compatibility problems. - Some receiver (original AR600) need to rebind per use,some receiver (Spektrum integrated receiver) frame rate is a bit slow. This issue basically determine the problem is on the program itself. Tested Ground Control Distance: CC2500: V8FR receiver with Frsky protocol,about 240m. A7105: WLToys V911 helicopter with Flysky 8 ch receiver,based on Flysky protocol,about 240m. CYFR6936: Spektrum MCPX helicopter with DSM2 protocol,Walkera SUPERCP helicopter with DEVO protocol,about 200m, NRF24L01: WLToys V977 helicopter with KN protocol,use Walkera DEVO transmitter,about 200m (If equipped with MCU baseplate,only 50m). Hisky HCP100S helicopter with Hisky protocol,about 70m. Firmware & Software,please Click Here Package Included: 1x 4-in-1 wireless module 2x Antennas (as the picture shows) Protocols & Models Table: {more}

Brand - DEVO
Model - 1048377

Product Price - 33.65 $

Order 2.4G CC2500 A7105 Flysky Frsky Devo DSM2 Multiprotocol TX Module With Antenna

CC2500 NRF24L01 A7105 Multi RF 3 IN 1 Wireless Module for DEVO Transmitter  Thumbnail

CC2500 NRF24L01 A7105 Multi RF 3 IN 1 Wireless Module for DEVO Transmitter

Product Description - Because of the excellent work of Deviation forum, Devo series radios(DEVO7, DEVO7E, DEVO10, DEVO8S, DEVO12S) can support many different protocols now, some of the protocols need additional 2.4GHz transceiver module(s). and the 3 IN 1 module is meet for this. It integrates three RF chips(CC2500, NRF24L01, A7105) in one single PCB board. It supports more than 10 different protocols, such as Frsky, Flysky, WLtoys, Hubsan, Hisky and so on. Pin assignment: Pin function: Number Name Property Description 1 VCC power 3.3V Power supply 2 GND power Ground 3 PAEN input PA Enable, with internal pull-ups, not connect 4 LANEN input LNA Enable, with internal pull-ups,not connect 5 MOSI input SPI input for slave device 6 MISO output SPI output for slave device 7 CE_NRF input NRF24L01 chip enable, with internal pull-ups, not connect 8 SCK input SPI clock signal 9 CS_2500 input CC2500 chip select 10 CS_2401 input NRF24L01 chip select 11 GND power ground 12 CS_7105 input A7105 chip select Installation: You can use 30 AWG wires to connect the module and the Devo Transmitter, the pattern is as follows. after that, Fix the antenna to the top of the Transmitter, next to the original one. For Devo 7e, you should connect a wire to the MCU, you can use heat tape to cover unwanted MCU pins and expose the useful one, the next soldering work will be much easier. Connection: RF Module DEVO10 DEVO7E SCK 2 2 MOSI 4 3 MISO 5 4 CS_2500 13 10 CS_2401 16 13 CS_7105 12 9 VCC 15 12 GND 3 or 8 or14 7 or11 You can define the connections of 'CS' pins by yourself, and you should modify the 'ini' file at the same time(see below) Devo10 connections: In addition to the D7E, other transmitter such as D8S, they have the same connection with the D10. Devo7e connections: Upgrade firmware For more information, please visit the deviation forum: http://www.deviationtx.com/downloads-new http://www.deviationtx.com/forum/7-development/5434-3in1-4in1-rf-module?limitstart=0 http://www.deviationtx.com/articles/35-getting-started Modify .ini file You should modify the .ini file to enable the module, after upgrade firmware, connect your transmitter to computer, hold and press 'ENT' key while turning on your transmitter, then the transmitter will be recognized as an USB drive, you can find an 'ini' file (hardware.ini or tx.ini, depend on your firmware) at the root of this drive, use an text editor to open the ini file, and then modify it as shown: Ini file for Devo10 Ini file for Devo7e Note: For Devo7e, there may be a warning that says 'Missing modules' when you turn on transmitter. to solve it ,you can turn off transmitter and then turn on it again. The reason is that Devo7e's power supply is very limit, it's maybe not ready at the beginning. For frsky protocol, you may adjust the 'Freq-course' parameter to reach max range. Package included: 1 x CC2500 NRF24L01 A7105 Multi RF 3 IN 1 Wireless Module for DEVO Transmitter {more}

Brand - DEVO
Model - 1046304

Product Price - 29.99 $

Order CC2500 NRF24L01 A7105 Multi RF 3 IN 1 Wireless Module for DEVO Transmitter

KS SERVO RS610 DEVO 2.4GHz 7CH DSSS PPM PWM S.bus Receiver With Simulator Function Thumbnail

KS SERVO RS610 DEVO 2.4GHz 7CH DSSS PPM PWM S.bus Receiver With Simulator Function

Product Description - KS SERVO RS610 DEVO 2.4GHz 7CH DSSS SBUS PPM Receiver With Simulator Function Normal Mode Port Definitions: PWM Mode Port Definitions: S.bus Output Port Definitions: PPM Output Port Definitions: Description: Brand Name: KS SERVO Item Name: RS610 DEVO 7CH 2.4GHz Digital Receiver Channel: 7CH Application frequency: 2.400Ghz-2.4800Ghz Application Protocol: DEVO Output Signal: PPM, PWM, S.bus Application technology: spread spectrum frequency hopping DSSS technology Communication distance: 500 meters Power supply: 3.7V-5.5V Size: 32mm * 19mm * 12mm Weight: 7g Features: 1. Using DSSS technology to support DEVO protocol. 2. Support min USB wireless dongle simulator function. 3. The receiver supports a fixed Sbus or PPM output. 4. Support PWM, PPM, Sbus signal input when input as cable simulator. 5. The main processor with 32-bit ARM processor. 6. Support PhoenixRC 5 wireless simulator function, truly wireless practice wireless flying. 7. PWM, PPM, Sbus identificate automaticlly when in the wireless simulator mode Simulator Function: 1.Support Phoenix Rc 5 wireless simulator function, you can have fun with wireless practising and wireless flighting, to release the fetter of the computer simulator's signal 2.Automatic recognition PWM PPM Sbus while with wireless mode 3.Regular receiver function,the wight with softdog is less then 4g. 4.You can also use this function with other receivers by plug it in. Binding: 1. Power off the remote control, press the button on the receiver. After around 3 seconds, the receiver will blink at high speed (releasing the button). At this time, the receiver enters into the bind state, please put the transmitter antenna as close as possible to the receiver antenna. 2. Power on the radio and start to bind, receiver LED flash clowly or off means binding successfully, if fails please repeat the steps above. 3.The receiver binding successful,then the LED normally on. 4. SBUS and PPM output is switched by the binding time 1). SBUS selection: When the receiver enters into binding state, start the transmitter bind immediately, and bind within 30 seconds, then the receiver will output SBUS signal. 2). PPM selection: When the receiver enters into binding state, waiting 30 seconds and power on the radio to start bind, then the receiver will output PPM signal. When the output is PPM, the receiver LED Blinks once every 10 seconds to indicate the output signal mode. Package Included: 1X KS SERVO RS610 DEVO 7CH 2.4GHz Digital Receiver {more}

Brand - DEVO
Model - 1112271

Product Price - 13.99 $

Order KS SERVO RS610 DEVO 2.4GHz 7CH DSSS PPM PWM S.bus Receiver With Simulator Function

STAR POWER Radio Control Switch Color Nut for Futaba JR DEVO  Thumbnail

STAR POWER Radio Control Switch Color Nut for Futaba JR DEVO

Product Description - Note This item not suitable for all the transmitter. It is better for Futaba and JR transmitter. About other transmitter can use them or not, we also not sure about that. We can not test this item on all different type of transmitter.(Not suitable for Taranis X9D) Please pay attention of it. Best regards Description: Used for Futaba transmitter and some JR transmitter Multi color set contains 6 color nuts (red, Orange, green, purple, blue, Gold 6 colors) Length of nut corresponding to long handle control switch and short handle switch.Note the difference when you installed. When you install,only need to install nut tool convex parts align on the nut groove,it can help install and dismantle Color Set: red*2 + blue*2 + gold*2 + purple*2 + orange*2 + green*2 Package Included: 1 x Disassembling tool(Color may vary, randomly sent) 12 x Control Switchs {more}

Brand - DEVO
Model - 1021926

Product Price - 11.99 $

Order STAR POWER Radio Control Switch Color Nut for Futaba JR DEVO