Brand Listings


Realacc X210 PRO 3K Frame w / CC3D REVO F4 Racerstar BR2205 2600KV Motor RS30A V2 Blheli S 5X4X3 Prop Thumbnail

Realacc X210 PRO 3K Frame w / CC3D REVO F4 Racerstar BR2205 2600KV Motor RS30A V2 Blheli S 5X4X3 Prop

Product Description - Realacc X210 PRO 3K 4mm Frame + CC3D REVO F4 + 4X Racerstar BR2205 2600KV Motor + 4X RS30A V2 Blheli_S ESC + 7 Pairs Kingkong 5X4X3 Prop Items Specifications Features Realacc X210 PRO 3K FPV Racing Frame Wheelbase: 214mm Material: carbon fiber Weight: 98g (frame + hardware) Made of 3K carbon fiber. Cutting accroding to the texture, much stronger. Integrated 4mm carbon fiber frame arm and lower plate. Dual purpose FPV and HD camera mounting solution. Compact size for 5' propellers, 214mm motor to motor. Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns). 'Bumpers' on the end of the arms to protect the motor during a crash, just like the QAV250. Included power distribution board. LiPo battery protection plate included. Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc). Lightweight and rigid CC3D REVO F4 STM32F405 Flight Controller New generation F4 hardware flight controller for FPV race, STM32F405 MCU Frequency up to 168Mhz ,Flight controller firmware is pushing flight controllers to the limit. Fast loop times enable sophisticated filtering to deliver the locked in, flying on rails feeling. Betaflight easily delivers 125us (or faster) loop times on the F4 flight controller Buzzer Port and LED strip Port MPU6000 SPI Bus 128Mb Flash(16M Byte) SBUS/PPM input (Pinheaders) DSM/DSM2/DSMX input(Plug) 6PWM output (Pinheaders) Only 36x36mm, mount holes 30.5x30.5mm All through hole pin header Design -no Sh connectors STM32 F405 MCU, Runs Raceflight CC3D REVO firmware Works Perfect with Raceflight - preloaded with Raceflight or BetaFlight 3.0 direct Lipo input :1.5A Built-in onboard regulator - NO BEC needed. Connect direct to a Lipo to power the board and Rx RaceFlight or Betaflight support on an STM32 F3 with a SPI based MPU6000 gyro - low noise gyro will not force one to soft-mount the fc Racerstar Racing Edition BR2205 2600KV 2-4S Brushless Motor RPM/V: 2600KV Height: 31.5mm Width: 27.9mm Shaft diameter: M5 Motor mount hole size: M3 Weight: 28 grams Voltage: 2-4S Battery: 2-4S lipo battery Internal resistance: Usage: for 250 260 280 Multirotor Frame Kit Racerstar RS30A V2 30A Blheli_S ESC Item Name:New Beheli_S 30A ESC Model: RS30A V2 Input Voltage: 2-4S Con.Current:30A Peak Current(10s):35A BEC:NO Programming :YES Net Weight: 6.26g Size:28*13mm Chips on EFM8BB21F16, 48MHZ Greatest . BLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation. Small size combined with light weight for easy installation. The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us) Oneshot42 (41.7-83.3us) and Multishot (5-25us). The input signal is automatically detected by the ESC upon power up. All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts. 7 Pairs Kingkong 5X4X3 5040 5 Inch 3-Blade Rainbow Colorful Propeller Color: Red, Orange, YelloW, Green, Pink, Purple and Black Quantity: 7 Pairs (One Pair Each Color) Mounting Hole: 5mm Weight: 119g Size: 140*140*65 mm Package included: 1 x Realacc X210 PRO 3K carbon fiber frame kit 1 x PDB 5V & 12V 1 x CC3D REVO F4 STM32F405 Flight Controller 2 x BR2205 2600KV Brushless Motor CW 2 x BR2205 2600KV Brushless Motor CCW 4 x Racerstar RS30A V2 30A ESC 7 x 5040 CW Propellers 7 x 5040 CCW Propellers {more}

Brand - CC3D
Model - 1102264

Product Price - 119.99 $

Order Realacc X210 PRO 3K Frame w / CC3D REVO F4 Racerstar BR2205 2600KV Motor RS30A V2 Blheli S 5X4X3 Prop

Realacc X210 Vplusw / CC3D REVO F4 plus Racerstar BR2205 2600KV Motor plus RS30A Blheli S ESC plus 5X4X3 Prop Thumbnail

Realacc X210 Vplusw / CC3D REVO F4 plus Racerstar BR2205 2600KV Motor plus RS30A Blheli S ESC plus 5X4X3 Prop

Product Description - Realacc X210 V+ 6K 4mm Frame + CC3D REVO F4 + 4X Racerstar BR2205 2600KV Motor + 4X RS30A V2 Blheli_S ESC + 7 Pairs Kingkong 5X4X3 Prop Items Specifications Features Realacc X210 V+ 6K FPV Racing Frame Wheelbase: 214mm Material: carbon fiber Weight: 98g (frame + hardware) X210 V+ Pro was made of 6K carbon fiber. Integrated 4mm carbon fiber frame arm and lower plate. Dual purpose FPV and HD camera mounting solution. Compact size for 5' propellers, 214mm motor to motor. Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns). 'Bumpers' on the end of the arms to protect the motor during a crash, just like the QAV250. Included power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. LiPo battery protection plate included. Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc). Lightweight and rigid CC3D REVO F4 STM32F405 Flight Controller New generation F4 hardware flight controller for FPV race, STM32F405 MCU Frequency up to 168Mhz ,Flight controller firmware is pushing flight controllers to the limit. Fast loop times enable sophisticated filtering to deliver the locked in, flying on rails feeling. Betaflight easily delivers 125us (or faster) loop times on the F4 flight controller Buzzer Port and LED strip Port MPU6000 SPI Bus 128Mb Flash(16M Byte) SBUS/PPM input (Pinheaders) DSM/DSM2/DSMX input(Plug) 6PWM output (Pinheaders) Only 36x36mm, mount holes 30.5x30.5mm All through hole pin header Design -no Sh connectors STM32 F405 MCU, Runs Raceflight CC3D REVO firmware Works Perfect with Raceflight - preloaded with Raceflight or BetaFlight 3.0 direct Lipo input :1.5A Built-in onboard regulator - NO BEC needed. Connect direct to a Lipo to power the board and Rx RaceFlight or Betaflight support on an STM32 F3 with a SPI based MPU6000 gyro - low noise gyro will not force one to soft-mount the fc Racerstar Racing Edition BR2205 2600KV 2-4S Brushless Motor RPM/V: 2600KV Height: 31.5mm Width: 27.9mm Shaft diameter: M5 Motor mount hole size: M3 Weight: 28 grams Voltage: 2-4S Battery: 2-4S lipo battery Internal resistance: Usage: for 250 260 280 Multirotor Frame Kit Racerstar RS30A V2 30A Blheli_S ESC Item Name:New Beheli_S 30A ESC Model: RS30A V2 Input Voltage: 2-4S Con.Current:30A Peak Current(10s):35A BEC:NO Programming :YES Net Weight: 6.26g Size:28*13mm Chips on EFM8BB21F16, 48MHZ Greatest . BLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation. Small size combined with light weight for easy installation. The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us) Oneshot42 (41.7-83.3us) and Multishot (5-25us). The input signal is automatically detected by the ESC upon power up. All codes use damped light mode.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts. 7 Pairs Kingkong 5X4X3 5040 5 Inch 3-Blade Rainbow Colorful Propeller Color: Red, Orange, YelloW, Green, Pink, Purple and Black Quantity: 7 Pairs (One Pair Each Color) Mounting Hole: 5mm Weight: 119g Size: 140*140*65 mm Package included: 1 x Realacc X210 V+ 6K carbon fiber frame kit 1 x PDB 5V & 12V 1 x CC3D REVO F4 STM32F405 Flight Controller 2 x BR2205 2600KV Brushless Motor CW 2 x BR2205 2600KV Brushless Motor CCW 4 x Racerstar RS30A V2 30A ESC 7 x 5040 CW Propellers 7 x 5040 CCW Propellers {more}

Brand - CC3D
Model - 1102265

Product Price - 114.99 $

Order Realacc X210 Vplusw / CC3D REVO F4 plus Racerstar BR2205 2600KV Motor plus RS30A Blheli S ESC plus 5X4X3 Prop

OpenPilot CC3D Revolution Flight Controller plus Oplink plus M8N GPS plus Distribution Board Thumbnail

OpenPilot CC3D Revolution Flight Controller plus Oplink plus M8N GPS plus Distribution Board

Product Description - OpenPilot CC3D Revolution Flight Controller + Oplink + M8N GPS + Distribution Board 1. OpenPilot CC3D Revolution Technical description CPU CPU is the STM32F405RGT6 chip, with ARM Cortex-M4 core at 210MIPS, FPU, and saturation arithmetics DSP functions. The chip features a range of built-in hardware modules that can bo programmed once and function independently, requiring little to no CPU overhead. These include 14x multichanel timers, 3x synchronous-sampling ADC serving up to 24 channels, 2x DAC, matrix memory controller with 16-stream DMA, and other. Communication modules include USB2.0, 3x I2C, 3x SPI, 4x USART, 2x CAN and SIDO. All these modules can be configured for accessing the chip pins using a flexible switch matrix, or disabled to save power. It even contains a real time hardware calendar if you want a wake up flight. The software and settings are loaded through USB connector and no-hassle update function in the GCS (Ground Control Station). Modem The board features a built-in 433MHz OPLink Modem. Dimensions OpenPilot products use the standard OpenPilot footprint, and hence has the same dimensions and mounting holes as the OpenPilot CC. CC3D, Revo, GPS, OSD and PipX boards. Ports Servo 1-6: These are the PWM outputs that go to servos or electronic speed controllers (ESCs). Power for the flight controller is typically supplied through these headers from only one of the ESCs, but in most cases, all the servo wires can be left connected. Cutting the pin from servo wires is highly discouraged. If you feel you must disconnect three of the hot wires, use some shrink tube or electrical tape to insulate the removed pin (you may need that positive voltage at a later date.). The positive (Vcc) and negative (Gnd) pins are indicated on this diagram and the board. In rare cases, you may need to also disconnect the ground pin if your ESCs are creating ground loop problems (indicated by a general weirdness in setup). (see the CopterControl - CC3D -Atom Hardware Setup page, Power section, for instructions on how to remove and insulate the extra pins) Servo output pin layout Outside --> ground Middle --> 5V - 8.4V Inside --> signal Flexi-IO Port The receiver port can act as an input or output port depending on the configuration which is set in the Hardware Settings. Configuring the receiver port as an output port allows the user to assign more output channels then the 6 standard servo outputs. PWM -vs- PPM Recievers Please be aware that not all receivers can be configured to use a PPM output. It is the user's responsibility to research this feature in regards to the desired receiver they wish to use for PPM and ensure it can be used as such. Many hours of frustration can occur while trying to troubleshoot why you can't get your radio to connect to the board with PPM if using a receiver than isn't designed with that feature. Simply make sure the receiver can do it before trying to set it up that way. MainPort JST-SH 4-pin. This is a serial USART whose baud rate can be adjusted through the GCS. Optionally, Futaba S.Bus receiver, Spektrum/JR satellite receiver or GPS can be mapped to the MainPort. Default configuration is Telemetry for connecting an RF modem. FlexiPort JST-SH 4-pin. The function of this port also depends on the configuration and can be configured for I2C or Serial. The default configuration doesn't use this port, but it can be used for Telemetry, GPS, Spektrum satellite receivers (all working) and other I2C peripherals (under development). RF Socket Antenna connection socket for on-board OPLink modem. Pwr Sen/Sonar Port JST-SH 4-pin. This port can be configured to accommodate an Autopilot current sensor and a low cost Sonar sensor such as the HC-SR04. It can also be used as a general purpose input/output port or as a one or two channel analog input port. Please note that the output rate on the output channels from the Flexi-IO Port cannot be set individually. If servos are connected to this outputs, you must ensure that they can work with the defined output rate for the bound channel. E.g. if you choose a high output rate to support an octocopter configuration, the update rate from the output channels from the ReceiverPort are bound to the update rate from channels 5 & 6. In this case, you cannot connect analog servo's to these outputs since an analog servo only supports an output rate of 50Hz.. 2. OpenPilot OPLINK First time use with OPLM When you first try to use your OPLM with the GCS, it will not be automatically picked up by the GCS. You first need to go into the 'Firmware' tab and click 'Upgrade & Erase' while the OPLink is disconnected. Then plug in OPLink when the upgrade process asks for it. Once this has been done, your OPLM board will show up at the bottom of your GCS as a connected device. The configuration page icon at the bottom of the page icon list may be hidden without scrolling down, depending on the size of your computer screen. OPLink Mini: 100mW Standalone Radio Modem 3 IO Ports: Micro-B USB, Mainport & Flexiport MMCX Antenna Connector. Weight: 4g Dimensions: 20mm x 29mm Input Voltage: +5v 3. Ublox NEO-M8N GPS(without compass) Receiver Type 72-channel u-blox M8 engine SBAS L1 C/A WAAS, EGNOS, MSAS Nav. Update Rate1 Single GNSS up to 18 HZ Concurrent GNSS up to 10 Hz Position Accuracy 2 2.0 m CEP Acquisition2 Cold Starts 26 s Aided Starts 2 s Reacquisition 1.5 s Sensitivity2 Tracking & Nav 167 dBm Cold Starts 148 dBm Hot Starts 156 dBm Built-In RTC Crystal Built-In Anti Jamming Active CW Detection and Removal. Extra Onboard SAW Band Pass Filter (NEO-M8N/Q) Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N) Data-logger For position, velocity, and time (NEO-M8N) RoHS Compliant (lead-free) Manufactured and fully tested in ISO/TS 16949 certified production sites Uses u-blox M8Chips Qualified: according to AEC-Q100 Operating Temperature 40 C to 85 C Storage Temperature 40 C to 85 C (NEO-M8N/Q) 40 C to 105 C (NEO-M8M) Supply Voltage 1.65 V to 3.6 V (NEO-M8M) 2.7 V to 3.6 V (NEO-M8N/Q) Power Consumption 4 23 mA @ 3.0 V (continuous) 5 mA @ 3.0 V Power Save Mode (1 Hz, GPS mode only) Backup Supply 1.4 to 3.6 V Timepulse Configurable 0.25 Hz to 10 MHz Qualification according to ISO 16750 NEO-M8N-0 u-blox M8 Concurrent GNSS LCC Module TCXO, flash, SAW, LNA, Usage For CC3D/Mini CC3D/Atom/CC3D Revolution Flight Controller Built-in Compass. Features: Quick satellite searching, only need 10s to find 6 satellite in open space Support GPS+BD+SBAS, or GPS+GLONASS+SBAS Assistance AssistNow GNSS Online AssistNow GNSS Offline (up to 35 days)3 AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliant Oscillator TCXO (NEO-M8N/Q) Crystal (NEO-M8N) WIth GPS folding antenna base Noise Figure On-chip LNA (NEO-M8M). Extra LNA forLowest Noise Figure (NEO-M8N/Q) Ublox new generation GPS NEO-M8N is very quick to searching signal, of high positioning precision and efficiency. Supported Antennas Active and Passive Odometer Travelled Distance Support European, Russian GLONASS, Japan China Module supports GPS+Big Dipper+SBAS or GPS+GLONASS+SBAS Package included: 1 x OpenPilot CC3D Revolution Flight Controller 1 x OPLINK 1 x Ublox M8N GPS 2 x 433MHz Antenna 1 x Distribution Board {more}

Brand - CC3D
Model - 1000084

Product Price - 96.89 $

Order OpenPilot CC3D Revolution Flight Controller plus Oplink plus M8N GPS plus Distribution Board

OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin  Thumbnail

OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin

Product Description - OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin The OpenPilot Revolution board, also called 'Revo' is a new breed of Autopilot using the STM32F4 Micro-controller. This is important as it contains a hardware floating point unit (FPU) which is a huge advancement for hobby-class autopilots. Of course, OpenPilot has been 32bit since day one, and the FPU is another step up the performance ladder. The Revolution is a flight control computer with autopilot, intended for multirotors, helicopters and fixed wings. It is a full 10DOF with gyroscope, accelerometer, magnetometer and pressure sensors. Technical description: Technical description CPU CPU is the STM32F405RGT6 chip, with ARM Cortex-M4 core at 210MIPS, FPU, and saturation arithmetics DSP functions. The chip features a range of built-in hardware modules that can bo programmed once and function independently, requiring little to no CPU overhead. These include 14x multichanel timers, 3x synchronous-sampling ADC serving up to 24 channels, 2x DAC, matrix memory controller with 16-stream DMA, and other. Communication modules include USB2.0, 3x I2C, 3x SPI, 4x USART, 2x CAN and SIDO. All these modules can be configured for accessing the chip pins using a flexible switch matrix, or disabled to save power. It even contains a real time hardware calendar if you want a wake up flight. The software and settings are loaded through USB connector and no-hassle update function in the GCS (Ground Control Station). MPU: 6000 Modem The board features a built-in 433MHz OPLink Modem. Dimensions OpenPilot products use the standard OpenPilot footprint, and hence has the same dimensions and mounting holes as the OpenPilot CC. CC3D, Revo, GPS, OSD and PipX boards. Ports Servo 1-6: These are the PWM outputs that go to servos or electronic speed controllers (ESCs). Power for the flight controller is typically supplied through these headers from only one of the ESCs, but in most cases, all the servo wires can be left connected. Cutting the pin from servo wires is highly discouraged. If you feel you must disconnect three of the hot wires, use some shrink tube or electrical tape to insulate the removed pin (you may need that positive voltage at a later date.). The positive (Vcc) and negative (Gnd) pins are indicated on this diagram and the board. In rare cases, you may need to also disconnect the ground pin if your ESCs are creating ground loop problems (indicated by a general weirdness in setup). (see the CopterControl - CC3D -Atom Hardware Setup page, Power section, for instructions on how to remove and insulate the extra pins) Servo output pin layout Outside --> ground Middle --> 5V - 8.4V Inside --> signal Flexi-IO Port The receiver port can act as an input or output port depending on the configuration which is set in the Hardware Settings. Configuring the receiver port as an output port allows the user to assign more output channels then the 6 standard servo outputs. PWM -vs- PPM Recievers Please be aware that not all receivers can be configured to use a PPM output. It is the user's responsibility to research this feature in regards to the desired receiver they wish to use for PPM and ensure it can be used as such. Many hours of frustration can occur while trying to troubleshoot why you can't get your radio to connect to the board with PPM if using a receiver than isn't designed with that feature. Simply make sure the receiver can do it before trying to set it up that way. MainPort JST-SH 4-pin. This is a serial USART whose baud rate can be adjusted through the GCS. Optionally, Futaba S.Bus receiver, Spektrum/JR satellite receiver or GPS can be mapped to the MainPort. Default configuration is Telemetry for connecting an RF modem. FlexiPort JST-SH 4-pin. The function of this port also depends on the configuration and can be configured for I2C or Serial. The default configuration doesn't use this port, but it can be used for Telemetry, GPS, Spektrum satellite receivers (all working) and other I2C peripherals (under development). RF Socket Antenna connection socket for on-board OPLink modem. Pwr Sen/Sonar Port JST-SH 4-pin. This port can be configured to accommodate an Autopilot current sensor and a low cost Sonar sensor such as the HC-SR04. It can also be used as a general purpose input/output port or as a one or two channel analog input port. Please note that the output rate on the output channels from the Flexi-IO Port cannot be set individually. If servos are connected to this outputs, you must ensure that they can work with the defined output rate for the bound channel. E.g. if you choose a high output rate to support an octocopter configuration, the update rate from the output channels from the ReceiverPort are bound to the update rate from channels 5 & 6. In this case, you cannot connect analog servo's to these outputs since an analog servo only supports an output rate of 50Hz.. Package included: 1 x OpenPilot CC3D Revolution Flight Controller with case 4 x connection cable 1 x 4pin cable 1 x antenna {more}

Brand - CC3D
Model - 1000068

Product Price - 46.99 $

Order OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin

Mini Ublox M8N GPS Module NEO-M8N GPS for APM 2.5 / 2.6 / 2.8 / CC3D / SP Racing F3 / Naze32 Flip32 / PX4 Thumbnail

Mini Ublox M8N GPS Module NEO-M8N GPS for APM 2.5 / 2.6 / 2.8 / CC3D / SP Racing F3 / Naze32 Flip32 / PX4

Product Description - Mini Ublox M8N GPS Module NEO-M8N GPS for APM 2.5/2.6/2.8 / CC3D / SP Racing F3 / Naze32 Flip32 / PX4 A new better GPS optional for APM, Pixhawk, CC3D, SP Racing F3, Naze32 and Flip32 flight controller. NEO-M8N will be the best choice for the Open Source Controller with it's Super High Precision and Fast Searching Star Efficiency. It has smaller size compare with old verison, and it weighs only 18g. This NEO-M8N GPS use the Original Imported M8N Chips, and optimize the function module, with Built-in the refresh rate increased to 10GHZ High Speed Searching Stars. We tested the fastest that found 6 Stars in 10 second at the open area. ( The star searching time depend on the location and weather condition) The Star searching Speed and quantity improived, support the Europe's Galileo, Russian GLONASS, Japanese Small Sun, Chinese BDS. The module support GPS + BDS + SBAS or GPS + GLONASS + SBAS Compared with original M8N GPS, the mini versions GPS inherited the high performance, meantime, it's more mini, compact, and with more beautiful appearance. Specially suitable for small size. Tips: When receive the M8N, because of the large changes of Location, please put on the open area for 1~2 hours. Use it after download the Ephemeris and Stable Position Located. 4 Versions optional, please choose the correct version according to your flight controller board: APM GPS: for APM2.5/2.6/2.8 flight controller use, with electronic, the interface is APM official standard line, Plug and play. PX GPS: for Pixhawk flight control, with electronic, the interface is Pixhawk official standard line. Plug and play Naze32 Flip32 GPS: for Naze32 Flip32 flight controller (comes without compass) Note: some Mini APM GPS port line is different from us, please check carefully the following pin diagram and together with the definition of flight control to reconnect. CC3D & SP Racing F3 GPS: GPS with electronic for CC3D & SP Racing F3 flight controller. (comes without compass) Package included: 1x M8N GPS with case 1x GPS holder {more}

Brand - CC3D
Model - 1035454

Product Price - 34.99 $

Order Mini Ublox M8N GPS Module NEO-M8N GPS for APM 2.5 / 2.6 / 2.8 / CC3D / SP Racing F3 / Naze32 Flip32 / PX4

Mini Ublox 7M GPS Module for CC3D Naze32 Flip32 F3 Flight Controller Thumbnail

Mini Ublox 7M GPS Module for CC3D Naze32 Flip32 F3 Flight Controller

Product Description - Mini Ublox 7M GPS Module for CC3D Naze32 Flip32 F3 Flight Controller Specification: Item name:7M GPS Module CC3D /SP Racing F3 Color GPS Flight Controller Black GND GND Red +5V +5V Blue RX TX Yellow TX RX NAZE32/FLIP32 Color GPS Flight Controller Black GND GND Red +5V +5V Blue RX TX Yellow TX RX Features: Original Ublox 7M chip Mini size, 54mm diameter Suitable for mini QAV For Naze32/Flip32 ,CC3D/ F3 Flight Controller Package Included: 1 X Mini Ublox 7M GPS Module {more}

Brand - CC3D
Model - 1042849

Product Price - 24.39 $

Order Mini Ublox 7M GPS Module for CC3D Naze32 Flip32 F3 Flight Controller

Raceflight Betaflight CC3D REVO F4 STM32F405 Flight Controller with Vbat / Buzzer Thumbnail

Raceflight Betaflight CC3D REVO F4 STM32F405 Flight Controller with Vbat / Buzzer

Product Description - Raceflight Betaflight CC3D REVO F4 STM32F405 Flight Controller with Vbat/Buzzer Definition diagram: Wiring diagram: ' Description: Item name: F4 Flight Controller New generation F4 hardware flight controller for FPV race, STM32F405 MCU Frequency up to 168Mhz ,Flight controller firmware is pushing flight controllers to the limit. Fast loop times enable sophisticated filtering to deliver the locked in, flying on rails feeling. Betaflight easily delivers 125us (or faster) loop times on the F4 flight controller Features: Buzzer Port and LED strip Port MPU6000 SPI Bus 128Mb Flash(16M Byte) SBUS/PPM input (Pinheaders) DSM/DSM2/DSMX input(Plug) 6PWM output (Pinheaders) Only 36x36mm, mount holes 30.5x30.5mm All through hole pin header Design -no Sh connectors STM32 F405 MCU, Runs Raceflight CC3D REVO firmware Works Perfect with Raceflight - preloaded with Raceflight or BetaFlight 3.0 direct Lipo input :1.5A Built-in onboard regulator - NO BEC needed. Connect direct to a Lipo to power the board and Rx RaceFlight or Betaflight support on an STM32 F3 with a SPI based MPU6000 gyro - low noise gyro will not force one to soft-mount the fc Dshot support (Need to update firmware to Betaflight 3.1 target AirbotF4) Package included: 1x Raceflight CC3D REVO F4 Flight Controller {more}

Brand - CC3D
Model - 1087561

Product Price - 21.99 $

Order Raceflight Betaflight CC3D REVO F4 STM32F405 Flight Controller with Vbat / Buzzer

Mini Ublox Neo-6M GPS For CC3D and Revolution Flight Controller Thumbnail

Mini Ublox Neo-6M GPS For CC3D and Revolution Flight Controller

Product Description - Mini Ublox Neo-6M GPS For CC3D & Revolution Flight Controller The latest generation of high precision Ublox Neo-6M GPS receiver incorporates a digital compass and features active circuitry for the ceramic patch antenna, rechargeable backup battery for hot starts, and flash memory for configuration storage. The Ublox Neo-6M GPS comes pre-configured for use with CC3D & Revolution Flight Controllers for easy set up while the folding pedestal mount provides a handy of mounting the compass away from sources of interference on you model. Description: Item Name: Mini Ublox Neo-6M GPS Receiver Type: 50 channel Ublox M8 engine Input voltage: 2.7 ~ 3.6V Backup power: 1.4 V ~ 3.6V 22 A Supports: NMEA, UBX binary, RTCM Position Accuracy: 2.5m Acquisition rate: Cold 27 secs, Aided 3 secs Re-acquisition 1 sec Tracking & Nav sensitivity: -167 dBm Cold Starts: -148 dBm Hot Starts: -156 dBm Default Baud Rate: 38400 Power Consumption: 111mA @ 3.0V (33mA @ 3.0V in power save mode) Operating Temperature: -40 ~ 85C Dimensions: 27.5 x 7mm Weight: 38g Features: Fast satellite acquisition (10s to find 6 satellite fixes in the open) High precision (2.5m) Built-in compass, refresh rate up to 10GHz Inbuilt RTC Crystal Flash memory Folding antenna base Low noise Active and passive antennas supported SAW band pass filter Data logger for position, velocity & time Configurations instructions Package Included: 1 x Mini Ublox Neo-6M GPS Module 1 x Folding GPS mount and bracket {more}

Brand - CC3D
Model - 1022655

Product Price - 20.99 $

Order Mini Ublox Neo-6M GPS For CC3D and Revolution Flight Controller

Spedix CC3D Flight Controller Connected Directly To DSM2 DSMX Satellite S.Bus Thumbnail

Spedix CC3D Flight Controller Connected Directly To DSM2 DSMX Satellite S.Bus

Product Description - Spedix CC3D Flight Controller Connected Directly To DSM2 DSMX Satellite S.Bus This version of CC3D board has two additiona ports for DSM satellite and S.Bus receivers. Otherwise they are the same as the original design.can be connected directly to a DSM2/DSMX satellite and S.bus port without using an adapter. Please note there is no manual included in the package. Please search online for video tutorials for setup. The system has been designed from the ground up to perform the following functions: A MultiRotor controller with auto-level, including TriCopters, QuadCopters and HexaCopters A Flybarless Helicopter controller with auto-level A Fixed Wing UAV controller Description: Input Voltage: 4.8-6.0V Dimensions:39x39x12mm Weight: 14g Firmware Version:15.02 Features: Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac and Linux Direct high speed USB support with no drivers required, a truly plug and play device. Spektrum satellite receiver support Futaba S-BUS hardware support Innovative Flexi-port technology for superior port flexibility 4Mbits on-board EEPROM for configuration storage Flexiport: CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs. Superior user experience: OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe. The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody. All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it. Sensors and Components: 3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000 Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers Simultaneous support for multiple receivers ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels MainPort functions (configurable): serial telemetry (default) GPS, S.Bus, Spektrum/JR satellites FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) 10 PWM outputs to servos or ESC's, or for camera stabilization Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers Onboard USB connectivity for easy configuration USB and serial telemetry and configuration (including wireless with optional radio modules) Supported by powerful OpenPilot GCS 4 Mbit onboard memory 3C Quaternion based complementary filter running at 500Hz Package included: 1 x CC3D flight controller 1 x Cable set {more}

Brand - CC3D
Model - 977491

Product Price - 16.55 $

Order Spedix CC3D Flight Controller Connected Directly To DSM2 DSMX Satellite S.Bus

CC3D V2.0 CC3D V2.0 Flight Controller with 5V / 12V BEC for FPV Racer Multicopters Thumbnail

CC3D V2.0 CC3D V2.0 Flight Controller with 5V / 12V BEC for FPV Racer Multicopters

Product Description - CC3D_V2.0 CC3D V2.0 Flight Controller with 5V/12V BEC for FPV Racer Multicopters Specification: Brand name: CC3D V2.0 Flight Controller with 5V/12V BEC Voltage: 5V/3A,12V/3A Battery: 1-6S Size: 3.6 * 3.6cm Weight: 9.9g Package Included: 1 X CC3D_V2.0 Flight Control 2 X 4P line 1 X 8P Line 4 X M3 nylon column 4 X M3 nylon screw 4 X M3 nylon nut {more}

Brand - CC3D
Model - 1055780

Product Price - 15.99 $

Order CC3D V2.0 CC3D V2.0 Flight Controller with 5V / 12V BEC for FPV Racer Multicopters

Openpilot MINI CC3D NANO Atom Flight Controller for QAV250 Multicopter 250 Frame Kit Thumbnail

Openpilot MINI CC3D NANO Atom Flight Controller for QAV250 Multicopter 250 Frame Kit

Product Description - Openpilot MINI CC3D NANO Atom Flight Controller for QAV250 Multicopter 250 Frame Kit Compare with the normal CC3D Flight Controller: Description: Item name: CC3D Atom/Mini CC3D/CC3D EVO Size (board only): 1/3 the old version Features: About half the size of the regular OpenPilot CC3D, but with the same functionality. The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac and Linux. Direct high speed USB support with no drivers required. Spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage. This OpenPilot CC3D Atom board also includes a high quality, protective case. Side pin mini CC3D flight controller Package included: 1 x mini CC3D Flight Controller 1 x Cable {more}

Brand - CC3D
Model - 992324

Product Price - 14.99 $

Order Openpilot MINI CC3D NANO Atom Flight Controller for QAV250 Multicopter 250 Frame Kit

OpenPilot CC3D Atom Mini CC3D FPV Flight Controller CC3D EVO Thumbnail

OpenPilot CC3D Atom Mini CC3D FPV Flight Controller CC3D EVO

Product Description - OpenPilot CC3D Atom Mini CC3D FPV Flight Controller CC3D EVO Straight pin: Bent pin: Anti-vibration damper set Antenna pedestal Interface definition This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality. Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size. Description: Item name: CC3D Atom/Mini CC3D/CC3D EVO Size (board only): 30mm x 17mm Size (in case): 22 x 38 x 12mm WxLxH Features: The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac and Linux. Direct high speed USB support with no drivers required. Spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage. This OpenPilot CC3D Atom board also includes a high quality, protective case. Optional straight and bent pin Package included: 1 x CC3D Atom flight controller 1 x 8 pin cable 1 x 4 pin cable 1 x 3m double-sided sticker 1 x antenna pedestal 1 x anti-vibration damper set {more}

Brand - CC3D
Model - 970762

Product Price - 14.39 $

Order OpenPilot CC3D Atom Mini CC3D FPV Flight Controller CC3D EVO

PDB Power Distribution Board 5V / 12V BEC with LED for F3 NAZE32 CC3D Flight Controller Thumbnail

PDB Power Distribution Board 5V / 12V BEC with LED for F3 NAZE32 CC3D Flight Controller

Product Description - PDB Power Distribution Board 5V/12V BEC with LED for F3 NAZE32 CC3D Flight Controller Specification: Item name:Power Distribution Board BEC: 5V/12V output Compatibled with QVA250, ZMR250 frame kit Support CC3D, NAZE32, F3 flight controller Package Included: 1 X Power Distribution Board {more}

Brand - CC3D
Model - 1044896

Product Price - 12.99 $

Order PDB Power Distribution Board 5V / 12V BEC with LED for F3 NAZE32 CC3D Flight Controller

OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport Thumbnail

OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport

Product Description - OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. CC3D CopterControl Hardware Features Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac and Linux. Direct high speed USB support with no drivers required, a truly plug and play device. Spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage. Flexiport CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs. Superior user experience OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe. The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody. All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it. Sensors and Components 3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000 Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers. Simultaneous support for multiple receivers. ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels MainPort functions (configurable): serial telemetry (default) GPS, S.Bus, Spektrum/JR satellites FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) 10 PWM outputs to servos or ESC's, or for camera stabilization Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers. Onboard USB connectivity for easy configuration. USB and serial telemetry and configuration Supported by powerful OpenPilot GCS 4 Mbit onboard memory 3C Quaternion based complementary filter running at 500Hz Note: Color: white and black (delivery randomly) Installation settings for CC3D flight controller, click here. Package included: 1 x CC3D Flight Controller 1 x 8p wire rod 2 x 4p expansion path 1 x flight controller case {more}

Brand - CC3D
Model - 956366

Product Price - 12.98 $

Order OpenPilot CC3D Flight Controller Bent Pin STM32 32-bit Flexiport

OpenPilot CC3D Flight Controller Staight Pin STM32 32-bit Flexiport  Thumbnail

OpenPilot CC3D Flight Controller Staight Pin STM32 32-bit Flexiport

Product Description - OpenPilot CC3D Flight Controller Staight Pin STM32 32-bit Flexiport is available now from our US and UK warehouse Free shipping to US and UK in 3-6 business days ship to Canada,Brazil in 7-10 days in US warehouse ship to European countries in 7-10 days in UK warehouse OpenPilot CC3D Flight Controller STM32 32-bit Flexiport The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. CC3D CopterControl Hardware Features Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac and Linux. Direct high speed USB support with no drivers required, a truly plug and play device. Spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage. Flexiport CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs. Superior user experience OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe. The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody. All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it. Sensors and Components 3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000 Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers. Simultaneous support for multiple receivers. ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels MainPort functions (configurable): serial telemetry (default) GPS, S.Bus, Spektrum/JR satellites FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) 10 PWM outputs to servos or ESC's, or for camera stabilization Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers. Onboard USB connectivity for easy configuration. USB and serial telemetry and configuration Supported by powerful OpenPilot GCS 4 Mbit onboard memory 3C Quaternion based complementary filter running at 500Hz Note: Color: white and black (delivery randomly) Installation settings for CC3D flight controller,click here. Package included: 1 x CC3D Flight Controller 1 x 8p wire rod 2 x 4p expansion path 1 x flight controller case {more}

Brand - CC3D
Model - 937044

Product Price - 12.98 $

Order OpenPilot CC3D Flight Controller Staight Pin STM32 32-bit Flexiport

OP GPS for Openpilot CC3D Revolution EVO Atom Mini CC3D Filght Controller Thumbnail

OP GPS for Openpilot CC3D Revolution EVO Atom Mini CC3D Filght Controller

Product Description - OP GPS for Openpilot CC3D Revolution EVO Atom Mini CC3D Filght Controller This GPS is customized for Flight control board like CC3D/CC3D EVO/MINI CC3D/ATOM/CC3D REVOLUTION Internal Ublox 7 series chip core of manufacture OEM Super mini size, weight only 8g with protective case, is best for Racing drones like QAV250/ZMR250. Description: Size: 26mm x 21mm Weight: 8g Wire length: 15cm OP GPS suitable for CC3D Series, the plug is Openpilot Original. Connection diagram: Black to GND Red to +5V Blue to TX Orange to RX Notes: Because of the super mini size, there is no LED on the GPS, so you'd better use with OSD. Package Included: 1 x OP GPS {more}

Brand - CC3D
Model - 1000066

Product Price - 12.19 $

Order OP GPS for Openpilot CC3D Revolution EVO Atom Mini CC3D Filght Controller

7M / 8M Ublox M8N GPS Module for APM Pixhawk CC3D Naze32 F3 Flight Control Thumbnail

7M / 8M Ublox M8N GPS Module for APM Pixhawk CC3D Naze32 F3 Flight Control

Product Description - 7M/8M Ublox M8N GPS Module for APM Pixhawk CC3D Naze32 F3 Flight Control HGLRC UBLOX 8M: HGLRC UBLOX 7M: NOTE: This module without a compass Specification: Item name: Ublox M8N GPS Weight: 10g Features: 1. NMEA 0183 standard output 2. Fast TTFF at low signal level 3.RoHS compliant (Lead-free) 4. UBLOX high sensitivity solution 5. Jamming detection and mitigation 6. Multi-path detection and compensation 7. Built-in 12 multi-tone active interference canceller 8. Free hybrid ephemeris prediction to achieve faster cold start 9. Supports GPS, SBAS (WAAS, EGNOS, MSAS, GAGAN) and QZSS 10. Incorporated external LNA and SAW filter realize high-sensitivity and noise immunity 11. Integrated high sensitivity passive Patch Antenna, Size:18(w)mmX18(d)mmX4(h)mm Package included: 1 x GPS module {more}

Brand - CC3D
Model - 1078657

Product Price - 12.13 $

Order 7M / 8M Ublox M8N GPS Module for APM Pixhawk CC3D Naze32 F3 Flight Control

Realacc GX210 Customised CC3D FC Flight Controller for RC Racer Thumbnail

Realacc GX210 Customised CC3D FC Flight Controller for RC Racer

Product Description - Realacc GX210 Customised CC3D FC Flight Controller for RC Racer Description : Brand Name: Realacc Item Name : CC3D FC Package Included : 1 x Board {more}

Brand - CC3D
Model - 1105101

Product Price - 11.99 $

Order Realacc GX210 Customised CC3D FC Flight Controller for RC Racer